Miele PDR 508 ROP [EL] 13A
(8kg) Professional Vented Dryer
8kg professional exhaust air / vented tumble dryer for commercial and high-use laundry rooms needing dependable drying, simple operation and fabric care.
- ✓8kg load with 130-litre drum
- ✓Vented electric drying for daily use
- ✓86-minute Cottons/Normal programme
- ✓PerfectDry residual moisture control
- ✓Stackable with matching washer or dryer
Fri 8.30am–5pm
Use the button below and we’ll call you back.
Product Overview
The Miele PDR 508 ROP [EL] is an 8kg professional vented tumble dryer from the Miele Little Giants Performance range, built for sites that need reliable commercial drying from a compact 230v, 13A machine.
Miele advertises this model as delivering 8kg drying performance in 86 minutes. It uses vented exhaust air drying with a 2.99 kW connected load, making it a practical option where a standard 13A electrical supply is preferred and suitable external ducting can be provided.
It is well suited to private residences, housing associations, schools, small commercial laundries, hospitality, sports clubs, beauty and fitness environments, campsites and other sites where a compact professional dryer is required. It can also be stacked with a suitable Miele washer to create a space-efficient laundry setup.
At a glance
850(h) x 596(w) x 717(d)
230v, 13A
Vented exhaust air
How a&f can support you
Buying commercial laundry equipment is about more than choosing the machine. We help you get the right Miele solution for your site from day one, and support you long after it is installed.
We can help with site survey, correct variant selection, ducting checks, supply, installation, commissioning, user training and long-term service support.
- ✓ Manufacturer-trained engineers
- ✓ Around £12,000 of Miele spare parts carried on each service van
- ✓ Warranty handling, annual servicing and service contracts
- ✓ Rental and finance options available alongside outright purchase
Need this machine supplied, installed and supported?
Speak to a&f about purchase, rental, installation and service contract options for this product.
Call us on 01243 55 55 25, option 1 for sales support, email sales@a-f.co.uk, or click the green button.
Features and buyer benefits
A practical overview of the features that matter most in daily use, helping buyers understand drying capacity, installation requirements, fabric care, user operation and long-term support.
8kg capacity
Professional drying capacity in a compact footprint
The 8kg load size and 130 litre drum make this dryer well suited to smaller commercial laundry rooms, shared laundries and sites needing more durability than a domestic dryer.
86-minute performance
Miele advertised 8kg drying performance
Miele advertises this model as delivering 8kg drying performance in 86 minutes, helping sites maintain a reliable laundry flow in a compact professional format.
Vented drying
Effective drying where external ducting is available
The exhaust air drying system is a strong option where the site has suitable ducting to atmosphere and needs consistent daily drying performance.
13A connection
Useful where a lower electrical load is preferred
This 230v, 13A version can be easier to accommodate than higher-load dryer variants, subject to the correct electrical supply and installation checks.
PerfectDry
Precision drying for different fabric types
PerfectDry uses residual moisture control to help dry laundry accurately, reducing the risk of over-drying and supporting better fabric care.
Honeycomb drum
Gentle, even drying inside a stainless steel drum
Miele’s stainless steel honeycomb drum and SoftLift drum ribs help laundry move gently and evenly, supporting fabric care and easier finishing after drying.
Large-surface filter
Straightforward routine lint care
The practical filter design helps users remove fluff as part of the daily routine, supporting airflow, drying performance and machine reliability.
M Select controls
Simple programme selection for busy users
The language-neutral fascia and rotary control make the dryer straightforward for staff, residents or users to operate with confidence.
Stackable design
A full laundry setup in less floor space
The dryer can be stacked with a suitable Miele washer, helping create a professional wash and dry solution where laundry room space is limited.
Payment ready
Suitable for shared and self-service laundries
Optional payment system connection makes this model useful for housing associations, universities, campsites and other shared laundry environments.
Connectivity options
WiFiConn@ct with optional LAN/WiFi module
Connectivity options support modern laundry management, including compatible Miele digital tools such as Miele MOVE where available and correctly configured.
Professional build
Miele Little Giants Performance range
This dryer is designed for intensive commercial use, making it a strong step up from domestic equipment in professional and semi-commercial laundry settings.
Technical specifications
Key technical details for the Miele PDR 508 ROP [EL] 230v, 13A version, including capacity, installation requirements, power, drying performance, controls and practical product features.
| Model | Miele PDR 508 ROP [EL] |
|---|---|
| Material number | 12752490 |
| Article number | 52508363GB |
| EAN | 4002516870913 |
| Range | Miele Little Giants, Performance |
| Product type | Professional vented tumble dryer |
| Load capacity | 8 kg |
|---|---|
| Drum volume | 130 litres |
| External dimensions | H 850 mm W 596 mm D 717 mm |
| Net weight | 49 kg |
| Installation type | Front-loader, stackable |
| Door hinge | Left-hand |
| Power Required | 230v, 13A |
|---|---|
| Total connected load | 2.99 kW |
| Electric heater rating | 2.76 kW |
| Heating type | Electric |
| Drying system | Vented exhaust air |
| Heat dissipation | 0.76 MJ/h |
| Advertised performance | 8 kg in 86 min |
|---|---|
| Cottons/Normal programme | 86 min at 48% residual moisture |
| Mixed fibre programme | 73 min at 40% residual moisture |
| Maximum evaporation capacity | 3.00 l/hour |
| Specific energy use | 0.49 kWh/kg |
| Sound pressure level | ≤70 dB(A) re 20 µPa |
| Control system | M Select |
|---|---|
| User interface | Residual moisture controlled |
| Programmability | Programmable |
| Languages | Selectable during operation |
| Delay start | Up to 24 hours |
| Connectivity | WiFiConn@ct, WiFi and optional LAN module |
| Finish | Lotus white front, enamelled lotus white side panels, stainless steel fascia |
|---|---|
| Door opening | 370 mm diameter, 167° opening angle |
| Drum | Stainless steel honeycomb drum |
| Fabric care features | PerfectDry, SoftLift drum ribs, intelligent drum reversal and low temperature function |
| Airflow features | Axial airflow and large-surface filter |
| Payment systems | Optional payment system connection |
| Compliance | CE, VDE, VDE-EMC, IPX4, WEEE, UKCA and Machinery Directive 2006/42/EC |
Choosing the right machine
Is the Miele PDR 508 ROP [EL] the right model for me?
The Miele PDR 508 ROP [EL] is a strong choice where a compact professional vented dryer is needed, the site has suitable external ducting, and a 230v, 13A electrical supply is preferred.
It is best suited to smaller commercial laundry rooms, shared laundries, private residences, housing associations, schools, sports clubs, campsites, beauty and fitness environments, and other sites where an 8kg professional dryer is the right match for the workload.
When is this dryer a good fit?
This model is a good fit where the site needs a compact commercial dryer with professional build quality, straightforward controls and fast vented drying performance.
- Suitable for sites needing an 8kg professional vented dryer.
- Useful where a 230v, 13A electrical supply is preferred.
- Appropriate where external exhaust ducting can be installed correctly.
- Can be stacked with a suitable matching Miele washer to create a compact laundry setup.
- Useful for shared laundry settings where optional payment connection may be required.
- Suitable where Miele MOVE compatibility is useful for digital machine visibility, subject to correct connectivity and setup.
What should I check before choosing this model?
The most important checks are the site’s ducting route, electrical supply, laundry volume and user routine. A vented dryer can be highly effective, but it must be installed with suitable exhaust ducting to atmosphere.
- Confirm that the site can provide a suitable external exhaust duct route.
- Check that the ducting length, bends and termination point are suitable for the dryer.
- Confirm that a 230v, 13A electrical supply is available.
- Check that the 8kg capacity matches the washer and daily laundry volume.
- Make sure staff or users understand routine fluff filter cleaning.
- If Miele MOVE is required, check the connectivity setup, module requirements and network availability before installation.
When might another model be better?
This dryer is not always the best option. The right choice depends on the site’s services, available space, ducting route and laundry throughput.
- Choose a heat pump dryer if external ducting is not possible or is heavily restricted.
- Consider a higher-output electrical version if the site has the supply available and needs shorter drying times.
- Consider a larger dryer if the laundry regularly exceeds 8kg loads or the dryer will need to keep up with multiple washers.
- Consider a Benchmark dryer for heavier commercial use, larger loads or higher throughput.
- Review the full laundry flow if the washer can produce more work than this dryer can comfortably process.
Services, utilities and installation checks
This model is a vented exhaust air dryer. It requires a correct electrical supply and suitable ducting to atmosphere. Miele advertises this model as delivering 8kg drying performance in 86 minutes.
- Power Required: 230v, 13A.
- Total connected load: 2.99 kW.
- Drying system: vented exhaust air.
- External ducting must be assessed before installation.
- Good airflow and routine filter care are essential for drying performance.
- Connectivity options include WiFiConn@ct, WiFi and optional LAN module, supporting compatible Miele digital tools such as Miele MOVE where correctly configured.
Replacing an older dryer?
If this dryer is replacing an older Miele vented dryer, the key checks are the electrical supply, ducting arrangement, available space, control setup and whether the existing installation is still suitable for the new machine.
Older machines may have different air movement, connection details or installation clearances, so it is worth checking the full site arrangement rather than assuming a direct like-for-like swap.
This model may be relevant when replacing or searching for older Miele vented dryer models including PT7136, T5206, T5213, T5211 and T466.
Compliance, hygiene and environment
This model is a commercial tumble dryer, not a thermal disinfection machine. It can form part of a professional laundry process, but hygiene outcomes depend on the full process, including the washer, wash programme, segregation, handling and staff procedure.
- The Miele product page lists CE, VDE, VDE-EMC, IPX4, WEEE, UKCA and Machinery Directive 2006/42/EC compliance.
- For care, healthcare or veterinary settings, the full laundry process should be reviewed before choosing equipment.
- Ventilation and ducting should be assessed carefully so the dryer can operate safely and effectively.
- a&f can help confirm whether this dryer is suitable alongside the washer, installation and site process.
Need help checking suitability?
Contact us for a free specification check or site visit before ordering. Call us on 01243 55 55 25, option 1 for sales support, or email sales@a-f.co.uk.
Product downloads
Helpful documents for this machine
Download the key documents for the Miele PDR 508 ROP [EL] professional vented tumble dryer below. These include the Miele product sheet and the operating instructions. If you need installation guidance, ducting advice or help confirming whether this is the right dryer for your site, contact a&f and we will be happy to help.
Miele product sheet
Key product information for the PDR 508 ROP [EL] 230v, 13A vented dryer, including capacity, dimensions, power requirements, drying system, programme performance and core features.
Miele operating instructions
Manufacturer guidance covering safe operation, programme use, routine care, fluff filter cleaning and user instructions for Miele Little Giants vented dryers.
Need another document or more product information?
If you need installation instructions, ducting guidance, compliance documents, user training support or help choosing the right version of this dryer, we will be happy to help. Call us on 01243 55 55 25, option 1 for sales support, or email sales@a-f.co.uk.
Our Products
Commercial laundry and dishwashing equipment
Products selected for the way you need them to work
a&f supplies commercial washing machines, tumble dryers, dishwashers, ironers, finishing equipment and payment systems from carefully selected commercial brands. Every recommendation is made in context, so the equipment suits your workload, staff, space, services and long-term objectives.
Discover. Define. Deliver.
Every operation is different. We take time to understand your operation, design the right solution, and support it for the long term so your laundry and dishwashing operation works in practice.
DISCOVER
We come to you and learn how your operation really works.
- We assess space, access, utilities and real-world constraints.
- We explore your current challenges, pressures and priorities.
- We quantify demand, workflow and performance expectations.
- We agree what success looks like for you in practice.
DEFINE
We design the right solution around your operation.
- We shape layout, infrastructure and workflow before anything is fixed.
- We specify the right equipment and the right way to fund it, whether purchase, rental or contract hire.
- We produce a clear, fully costed and compliant proposal.
- We refine the plan with you until it is operationally sound.
DELIVER
We get you running, then keep you running for years to come.
- We install professionally, safely and with minimal disruption.
- We train you and your team for confident, correct daily operation.
- You gain a dedicated support team who know your operation.
- We protect performance through servicing and rapid response.
- We review, optimise and evolve your operation over time.
The a&f difference: we don't just supply equipment, we partner with you for the long term to keep your laundry operation running at its best.
Contact us on 01243 55 55 25 to learn more, or arrange your free site visit to get started.
Services & Support
Product advice, installation and support
From product selection through to installation, servicing and long-term support, a&f helps organisations choose equipment that fits their site, workload, users and operating requirements.
Support beyond the product
We supply, install and support professional laundry and dishwashing equipment, with guidance focused on performance, reliability, efficiency and long-term value.
Machine Repairs
Repair support for professional washers, dryers, dishwashers and associated equipment used across commercial and specialist environments.
Sales & Installation
Supply, installation and commissioning of equipment selected around the site, workload, users, infrastructure and long-term operating costs.
Annual Servicing & Inspections
Planned servicing and inspections to help keep equipment running reliably, reduce avoidable downtime and support long-term performance.
Service Contracts
Ongoing service support for organisations that rely on professional equipment as part of their everyday operation.
Machine Rentals
Rental options for sites that need a supported equipment solution without purchasing outright.
Laundry Analysis & Design
Practical advice for laundry rooms, dishwashing areas, plant spaces, service areas, refurbishments and new projects.
Not sure where to start?
A free site survey is usually the best first step when choosing professional laundry or dishwashing equipment for your site.
- Check the room, services, access, workflow and usage
- Compare suitable washing, drying, dishwashing and finishing options
- Avoid over-specifying or choosing equipment that does not fit the operation