Miele PDR 528 ROP Gas Commercial Dryer
20-28kg gas heated vented dryer with 500 litre drum
The Miele PDR 528 ROP Gas is a high-capacity commercial dryer for busy laundry rooms that need fast, moisture-controlled drying, gas heating and dependable daily throughput.
- ✓20-28kg load capacity with a large 500 litre honeycomb drum
- ✓23 minute Cottons/Normal programme under Miele test conditions
- ✓Gas heating and AirRecycling support fast, efficient drying
- ✓PerfectDry moisture control helps avoid under-drying and over-drying
- ✓Tested by Miele for 40,000 drying cycles under laboratory conditions
Fri 8.30am–5pm
Use the button below and we’ll call you back.
Product Overview
The Miele PDR 528 ROP Gas is a 20-28kg professional vented tumble dryer from the Miele Performance range, built for high-volume drying where gas heating, large capacity and fast turnaround are needed.
With a 500 litre stainless steel honeycomb drum, PerfectDry residual moisture control and a 23 minute Cottons/Normal programme under Miele test conditions, it is designed to help busy laundry teams process large loads efficiently. Actual drying times will depend on load type, residual moisture, selected programme, gas supply, ducting, room ventilation and site conditions.
This model is suited to commercial laundries, hotels, care homes, facilities management, equestrian sites, education, sports clubs, holiday parks and other settings where dependable daily drying capacity is critical. As a gas heated vented dryer, it needs the correct gas supply, exhaust route, ventilation and installation checks before ordering.
At a glance
H 1640 x W 1206 x D 1019
230v, 10A electrical supply plus suitable gas supply
Gas heated, vented exhaust air dryer
How a&f can support you
Buying commercial laundry equipment is about more than choosing the machine. We help you get the right Miele Professional solution for your site from day one, and support you long after it is installed.
We can help with site survey, correct product selection, supply, installation, commissioning, user training and long-term service support.
- ✓ Manufacturer-trained engineers
- ✓ Around £12,000+ of spare parts carried on each service van to improve first-time fix rates
- ✓ Warranty handling, annual servicing and service contracts
- ✓ Rental and finance options available alongside outright purchase
Need this machine supplied, installed and supported?
Speak to a&f about purchase, rental, installation and service contract options for this product. Call us on 01243 55 55 25, option 1 for sales support, email sales@a-f.co.uk, or click the green button.
Features and Benefits
A practical summary of the Miele PDR 528 ROP Gas features that matter in daily operation, including capacity, gas drying performance, fabric care, controls, connectivity and installation suitability.
High capacity
20-28kg load with a 500 litre drum
A large drum helps busy laundry rooms process bulky loads, towels, bedding, workwear and high daily volumes without stepping up to a much larger machine.
Gas heating
30kW gas heater rating
Gas heating can be a strong fit for high-use laundry rooms where gas services are already available and drying throughput is a major operational requirement.
Vented drying
Exhaust air drying for productive laundry flow
A vented dryer is often the preferred choice for heavy commercial use where suitable external ducting and room ventilation can be designed and maintained.
Fast programme time
23 minute Cottons/Normal test programme
Short programme cycles support high throughput, although real-world drying times depend on load type, residual moisture, selected programme and site services.
Moisture control
PerfectDry residual moisture control
PerfectDry helps finish loads to the right dryness level, reducing the risk of wasted running time, under-dried loads or unnecessary fabric stress.
Energy efficiency
AirRecycling reuses pre-heated process air
Miele AirRecycling helps reduce avoidable heat loss by recycling pre-heated process air, supporting lower consumption in a suitable installation.
Commercial durability
Tested to 40,000 drying cycles
Miele’s laboratory testing supports confidence for regular commercial use. It should be understood as a tested figure, not a guaranteed operating lifespan.
Fabric care
Honeycomb drum and SoftLift ribs
The stainless steel honeycomb drum and SoftLift ribs support even drying and gentler fabric movement for towels, bedding, uniforms and residents’ laundry.
Airflow design
Axial airflow and intelligent drum reversal
The drying air is guided through the drum to support even drying, while drum reversal helps reduce tangling and improve load movement.
Controls
M Select Benchmark control system
Clear rotary controls, easy-to-understand symbols, time-left display and delay start help staff select and manage programmes with confidence.
Maintenance access
Large-surface fluff filter
The large filter surface is designed to be easy to clean, helping staff maintain airflow, support performance and reduce avoidable dryer faults.
Connected laundry
WiFi, optional LAN and Miele MOVE support
Supports connected management for compatible Miele Professional machines, including machine status, programme data and Miele MOVE where configured.
Technical specifications
Key technical details for the Miele PDR 528 ROP Gas commercial dryer, including capacity, dimensions, gas and electrical requirements, drying performance, controls, connectivity and practical installation features.
| Model | Miele PDR 528 ROP [G] |
|---|---|
| Material number | 11718600 |
| EAN | 4002516409373 |
| Range | Miele Performance |
| Product type | Professional vented tumble dryer |
| Finish | Iron grey front, stainless steel fascia |
| Load capacity | 20-28kg, based on 1:25 to 1:18 load ratio |
|---|---|
| Drum volume | 500 litres |
| External dimensions | H 1640mm W 1206mm D 1019mm |
| Net weight | 246.3kg |
| Door opening | 520mm diameter, 180 degree opening angle |
| Door hinge | Left, convertible door hinging |
| Power Required | 230v, 10A electrical supply plus suitable gas supply |
|---|---|
| Electrical connection | 1N AC 230v 50Hz |
| Total connected load | 1.20kW electrical |
| Gas heater rating | 30.00kW |
| Heating type | Gas |
| Installation note | Gas connection must be assessed and completed by an appropriately qualified engineer |
| Drying system | Vented exhaust air |
|---|---|
| Programme duration | 23 minutes, Cottons/Normal test programme |
| Maximum evaporation capacity | 28.30 litres/hour |
| Specific energy use | 0.55kWh/kg |
| User interface | Residual moisture controlled |
| Lifecycle test figure | 40,000 drying cycles under Miele laboratory conditions |
Programme times and consumption figures depend on load type, residual moisture, selected programme, gas supply, exhaust ducting, room ventilation and site conditions.
| Control system | M Select Benchmark |
|---|---|
| Programmability | Setting of defined parameters |
| Delay start | Up to 24 hours |
| Display | Time left display and easy-to-understand symbols |
| Connectivity | WiFi supported, LAN via optional module |
| Miele MOVE | Supported for compatible Miele Professional machines where configured |
| Drum type | Stainless steel honeycomb drum |
|---|---|
| Fabric care | SoftLift drum ribs, intelligent drum reversal and axial airflow |
| Filter | Large-surface fluff filter |
| Connection options | Optional payment system, Connector Box and energy management connection |
| Sound level | 58 dB(A) re 20 µPa |
| Approvals and symbols | CE, UKCA, VDE, VDE-EMC, IPX4, DVGW gas, WEEE and Machinery Directive compliance |
Choosing the right machine
Is the Miele PDR 528 ROP Gas the right model for your site?
The Miele PDR 528 ROP Gas is a high-capacity commercial dryer for sites that need gas heating, vented drying, large load capacity and reliable daily throughput.
The right choice depends on more than capacity. This model must be matched to the workload, gas supply, exhaust ducting, room ventilation, access route, installation space and service support requirements.
When is this dryer a good fit?
This model is a good fit where the site needs a high-capacity professional dryer and has the correct services to support gas heated vented drying.
It is especially worth considering where:
- You need 20-28kg drying capacity for regular commercial laundry loads.
- The site has, or can provide, a suitable gas supply for this type of dryer.
- External exhaust ducting and make-up air can be designed correctly.
- Drying speed and daily throughput are more important than a compact footprint.
- The dryer needs to keep pace with larger commercial washing machines.
Typical environments may include commercial laundries, hotels, care homes, facilities management, equestrian sites, sports clubs, holiday parks, education and other high-use laundry rooms.
Contact us for a specification check or site visit before ordering.
Contact us
What should I check before choosing this gas dryer?
Gas heated vented dryers need more site checks than compact electric or heat pump dryers. The machine must be matched to the building, gas installation, exhaust route, room ventilation and laundry workload.
Before ordering, check:
- Whether the site has a suitable gas supply for the 30kW gas heater rating.
- Whether a 230v, 10A electrical supply is available for the dryer controls and fan systems.
- Whether the exhaust duct route can be kept suitable for airflow and safe termination.
- Whether the laundry room has enough make-up air and ventilation.
- Whether delivery access, door swing, service clearance and floor loading are suitable.
- Whether staff can maintain routine lint filter cleaning and airflow checks.
a&f can assess the site before supply and confirm whether the dryer, gas services, ducting and ventilation are suitable for the intended use.
When might another model be better?
Another dryer may be more suitable if the site does not have the services, space or laundry volume needed for this model.
A different model may be better if:
- Daily laundry volumes do not justify a 20-28kg dryer.
- The site cannot provide a suitable gas supply or commercial gas installation route.
- External ducting is not practical or cannot be made suitable.
- A smaller electric dryer would match the site workload more sensibly.
- A heat pump dryer is required because ducting is not available.
- The site needs even higher drying capacity from a larger Benchmark dryer.
The best option depends on the whole laundry process, including washer capacity, residual moisture, drying volume, user routine, available services and the room design.
Services, utilities and installation checks
This dryer should not be selected on specification alone. The site needs to be checked for gas supply, electrical supply, ducting, room ventilation, access, delivery route and safe service access.
Programme performance depends on the full installation, including duct length, outside temperature, load type, room ventilation and the residual moisture left by the washer. If drying time is critical, a&f can help assess realistic operating performance for the actual site rather than relying only on test-condition figures.
Key installation checks include:
- Gas supply, isolation, appliance location and suitability for a commercial laundry dryer.
- 230v, 10A electrical supply and safe isolation.
- Exhaust duct route, duct length, bends, grilles and termination point.
- Make-up air, room ventilation and avoiding negative pressure issues.
- Clearance for operation, cleaning, maintenance and future service work.
Replacing an older model?
The historic model references found for the Miele PDR 528 / PDR 928 family include several older Miele Professional dryer model numbers.
Previous model search terms:
- PT8503
- T6551
- T5248
- T248
Older model numbers do not always translate directly to a like-for-like replacement. Dimensions, gas connection, ducting, controls, performance, door position and compliance requirements should all be checked before confirming the replacement.
If you are replacing one of these machines, a&f can check the existing model, services and installation layout before confirming whether the PDR 528 ROP Gas is the right current replacement.
Compliance, safety and environment
This dryer can support efficient commercial drying, but safety and compliance depend on the full installation and operating routine.
Gas work must be carried out by an appropriately qualified Gas Safe registered engineer. Exhaust ducting and room ventilation must also be correctly designed, installed and maintained. Routine lint filter cleaning and airflow checks are important for performance, energy use and fire risk reduction.
AirRecycling, PerfectDry and residual moisture control can help reduce avoidable running time where the dryer is correctly installed and used, but the machine alone does not make the laundry process compliant. Compliance depends on machine selection, installation, maintenance, staff training, room design and safe operating procedures.
Read more in our gas compliance guide.
Product downloads
Helpful documents for this machine
Download the main documents for the Miele PDR 528 ROP Gas below. These include the product sheet and operating instructions. For installation, ducting, gas compliance or site suitability questions, contact a&f before ordering.
Miele PDR 528 ROP Gas product sheet
Key product information, including capacity, dimensions, heating type, drying system, performance figures, controls, connectivity and compliance symbols.
Miele PDR 528 Gas Dryer operating instructions
Full Miele operating instructions, including safety information, use, cleaning, maintenance, installation notes, gas connection guidance and connectivity information.
Need help interpreting the documents?
Commercial dryers must be matched to the site’s workload, gas supply, ventilation, exhaust route, floor loading and user routine. Call 01243 55 55 25, option 1 for sales support, email sales@a-f.co.uk, or ask a&f to confirm the right model and installation route.
Our Products
Commercial laundry and dishwashing equipment
Products selected for the way you need them to work
a&f supplies commercial washing machines, tumble dryers, dishwashers, ironers, finishing equipment and payment systems from carefully selected commercial brands. Every recommendation is made in context, so the equipment suits your workload, staff, space, services and long-term objectives.
Discover. Define. Deliver.
Every operation is different. We take time to understand your operation, design the right solution, and support it for the long term so your laundry and dishwashing operation works in practice.
DISCOVER
We come to you and learn how your operation really works.
- We assess space, access, utilities and real-world constraints.
- We explore your current challenges, pressures and priorities.
- We quantify demand, workflow and performance expectations.
- We agree what success looks like for you in practice.
DEFINE
We design the right solution around your operation.
- We shape layout, infrastructure and workflow before anything is fixed.
- We specify the right equipment and the right way to fund it, whether purchase, rental or contract hire.
- We produce a clear, fully costed and compliant proposal.
- We refine the plan with you until it is operationally sound.
DELIVER
We get you running, then keep you running for years to come.
- We install professionally, safely and with minimal disruption.
- We train you and your team for confident, correct daily operation.
- You gain a dedicated support team who know your operation.
- We protect performance through servicing and rapid response.
- We review, optimise and evolve your operation over time.
The a&f difference: we don't just supply equipment, we partner with you for the long term to keep your laundry operation running at its best.
Contact us on 01243 55 55 25 to learn more, or arrange your free site visit to get started.
Services & Support
Product advice, installation and support
From product selection through to installation, servicing and long-term support, a&f helps organisations choose equipment that fits their site, workload, users and operating requirements.
Support beyond the product
We supply, install and support professional laundry and dishwashing equipment, with guidance focused on performance, reliability, efficiency and long-term value.
Machine Repairs
Repair support for professional washers, dryers, dishwashers and associated equipment used across commercial and specialist environments.
Sales & Installation
Supply, installation and commissioning of equipment selected around the site, workload, users, infrastructure and long-term operating costs.
Annual Servicing & Inspections
Planned servicing and inspections to help keep equipment running reliably, reduce avoidable downtime and support long-term performance.
Service Contracts
Ongoing service support for organisations that rely on professional equipment as part of their everyday operation.
Machine Rentals
Rental options for sites that need a supported equipment solution without purchasing outright.
Laundry Analysis & Design
Practical advice for laundry rooms, dishwashing areas, plant spaces, service areas, refurbishments and new projects.
Not sure where to start?
A free site survey is usually the best first step when choosing professional laundry or dishwashing equipment for your site.
- Check the room, services, access, workflow and usage
- Compare suitable washing, drying, dishwashing and finishing options
- Avoid over-specifying or choosing equipment that does not fit the operation