This model is a good fit where the site needs meaningful laundry capacity, fast commercial programme performance and a machine built for heavier daily use.

• Suitable for sites needing a 16kg professional washer with a 140 litre drum.
• Useful for larger batches of laundry, mops, cleaning cloths, workwear, bedding and bulky items.
• Well suited to professional laundry rooms where short cycle times and dependable throughput matter.
• Appropriate where optional liquid dosing, payment connection or connected machine management may be required.
• Best where the site can provide the correct three-phase electrical supply, floor support and DN 70 drain arrangement.

The PWM 916 is a large professional washer and should be specified carefully. The main checks are power, drainage, floor loading, access, water services and whether the capacity is right for the site’s actual laundry volume.

• Confirm that a 400v, 25A three-phase electrical supply is available.
• Confirm that a suitable DN 70 drain arrangement can be provided for the dump valve.
• Check that the route into the laundry room can accept the machine’s size and weight.
• Allow for the 5091 N maximum floor load and suitable access for servicing.
• Review detergent dosing, payment connection and Miele MOVE requirements before ordering.

Another model may be more suitable if the laundry volume is lower, if the site lacks three-phase power, if space is limited, or if the customer needs a different capacity or specialist contamination-control layout.

• Consider a smaller washer if the site does not regularly fill a 16kg machine.
• Consider a larger washer where daily volumes would overload a 16kg machine or create bottlenecks.
• Choose a smaller model if the site needs a drain pump, as this size uses a drain valve rather than a pump.
• Review washer and dryer capacity together so that drying does not become the next bottleneck.
• A barrier washer should only be considered for rare, very high-risk contamination-control settings where physical separation is essential.

This model uses electric heating, a 400v three-phase supply and a DN 70 dump valve. Correct services are important for performance, safety, programme timing and long-term reliability.

• Power Required: 400v, 25A.
• Total connected load: 14.60 kW.
• Water connections: cold water, hot water and optional hard water.
• Drainage: DN 70 dump valve, suitable drainage must be planned before installation.
• Typical 60°C cotton programme: 49 minutes on cold fill, or 43 minutes with hot and cold fill.
• Mops standard 60°C programme: 53 minutes on cold fill, or 47 minutes with hot water connection.

If this washer is replacing an older Miele machine, the most important checks are capacity, dimensions, drainage, power supply, controls and whether the existing laundry process still meets the site’s current needs.

The PWM 916 is commonly relevant when replacing older Miele 16kg washer-extractor models, but the installation should still be checked because modern services, controls and drainage arrangements may differ.

Relevant older model search terms for this product include PW6167 and PW6161.

The PWM 916 includes hygiene-supporting features such as proven hygiene, tested germ-removal performance, disinfection rinse and temperature monitoring. For care, healthcare, veterinary, emergency service or other hygiene-led sites, the whole laundry process still needs to be reviewed.

• Correct programme selection, detergent dosing, water temperature and staff handling are all part of the hygiene outcome.
• Soiled and clean laundry routines should be clearly separated and managed by staff procedure.
• The product sheet lists Regulation 4 compliance, supporting use where water regulation requirements need to be considered.
• The machine has CE, UKCA, VDE, VDE-EMC, IPX4 and WEEE listings on the product sheet.
• a&f can help confirm whether this model, a smaller/larger washer or a more specialist configuration is the right fit.