This model is a good fit where you regularly process flatwork or smaller linen items and need a more consistent finish without moving to a large commercial ironer.

• Suitable for sites needing an 830 mm working width.
• Useful for table linen, pillowcases, smaller sheets, napkins, tea towels and similar flatwork.
• Suitable where staff need the option to iron while seated.
• Helpful where front feed and front return make the room layout easier.
• Appropriate where a 230v, 13A electrical supply is preferred over a larger power requirement.

Before choosing the HM 16-83, check the type and volume of linen you need to finish, the space available around the machine and whether staff will be trained to use a rotary ironer correctly.

• Confirm that the 830 mm working width is suitable for the linen you process.
• Check that the room allows safe feeding, return and operator movement.
• Confirm that a suitable 230v, 13A supply is available.
• Review whether the stated output of up to 15 kg/h is realistic for your linen type and staff process.
• Plan user training, especially if staff are moving from hand ironing to rotary ironing.

A larger rotary ironer may be better where your site processes a high volume of linen each day, regularly handles wider items or needs a higher output than the HM 16-83 can sensibly provide.

• Choose a larger ironer if the site regularly processes wider sheets or larger flatwork.
• Consider a PRI ironer where throughput is the main operational priority.
• Consider a different finishing solution if the workload is mostly shaped garments rather than flatwork.
• Review the full laundry process if washing and drying are producing more linen than this ironer can comfortably finish.

The HM 16-83 is electrically heated and designed for a 230v, 13A supply. It has front infeed and outfeed, and can be set up against a wall, which can help in smaller laundry rooms.

• Power Required: 230v, 13A.
• Total connected load: 2.60-3.10 kW.
• External dimensions: 960(h) x 1050(w) x 380(d) mm.
• Net weight: 40 kg.
• Four castors support easier positioning, but safe working space still needs to be planned.

If you are replacing an older Miele rotary ironer, the most important checks are working width, power supply, space, operator routine and whether the current linen workload still matches this size of machine.

Older sites may also need a review of the wider laundry process, especially if washing and drying capacity has increased since the previous ironer was installed.

This model may be relevant when replacing or searching for older Miele rotary ironer models including B863, B862, B855 and B850.

The HM 16-83 includes practical safety and usability features, including an automatic finger guard, foot switch, feed-in board, laundry return feed and airing bar. Staff still need clear training and a safe working routine.

• The datasheet lists VDE, CE, WEEE, VDE-EMC and UKCA.
• The datasheet states compliance with Machinery Directive 2006/42/EC.
• The automatic finger guard supports safer feeding, but it does not remove the need for operator care.
• a&f can help assess whether this ironer fits your site layout, linen type and user routine.