Miele PDR 910 Gas Commercial Dryer
8-10kg gas-heated vented commercial dryer with 180 litre drum
Miele PDR 910 [G] is a gas-heated commercial tumble dryer for sites that need fast, reliable drying, professional controls and a vented exhaust system planned around the room and duct route.
- ✓8-10kg load capacity with 180 litre honeycomb drum
- ✓40-minute Cottons/Normal reference programme supports throughput
- ✓Gas heating can reduce electrical load where services are suitable
- ✓PerfectDry moisture control helps avoid over-drying and fabric wear
- ✓M Touch Pro controls support clear, programmable daily operation
Fri 8.30am–5pm
Use the button below and we’ll call you back.
Product Overview
The Miele PDR 910 [G] is an 8-10kg gas-heated professional vented dryer from the Miele Performance Plus range, built for commercial laundry rooms that need fast drying with lower electrical demand than an equivalent electric dryer.
With a 180 litre honeycomb drum, PerfectDry residual moisture control and a 40-minute Cottons/Normal reference programme, it is designed to help busy sites dry towels, uniforms, bedding, workwear and general laundry efficiently.
This model is best suited to sites with a suitable gas supply, 230v electrical supply and a correctly designed exhaust route. It can fit care, hospitality, commercial laundry, launderette, school, sports, equestrian, fitness and residential laundry environments where gas and ventilation can be confirmed during survey.
At a glance
H 1020 x W 700 x D 763
230v, 10A plus gas connection
Gas-heated vented exhaust air dryer
How a&f can support you
Buying commercial equipment is about more than choosing the machine. We help you get the right professional solution for your site from day one, and support you long after it is installed.
We can help with site survey, correct variant selection, supply, installation, commissioning, user training and long-term service support.
- ✓ Manufacturer-trained engineers
- ✓ Around £12,000+ of spare parts carried on each service van to improve first-time fix rates
- ✓ Warranty handling, annual servicing and service contracts
- ✓ Rental and finance options available alongside outright purchase
Need this machine supplied, installed and supported?
Speak to a&f about purchase, rental, installation and service contract options for this product. Call us on 01243 55 55 25, option 1 for sales support, email sales@a-f.co.uk, or click the green button.
Features & Benefits
A practical overview of the features that matter most in daily use, helping buyers understand capacity, drying performance, fabric care, gas installation requirements and operational flexibility.
Capacity
8-10kg load with a 180 litre drum
A useful mid-size commercial dryer for regular daily laundry, supporting larger loads than compact machines without moving to a high-capacity plant-room dryer.
Gas heating
230v supply plus gas connection
Gas heating can be helpful where electrical capacity is limited or where the site prefers gas for commercial drying, subject to correct gas services and commissioning.
Drying speed
40-minute Cottons/Normal reference programme
The short reference programme supports efficient laundry turnaround, although actual drying times depend on load size, moisture level, programme selection and site conditions.
PerfectDry
Residual moisture controlled drying
Moisture sensing helps the dryer stop at the right point, reducing the risk of under-drying, over-drying and avoidable fabric wear.
Fabric care
Stainless steel honeycomb drum
The drum design supports gentle, even drying, helping protect towels, uniforms, bedding, clothing and other commercial textiles in routine use.
Airflow
Axial airflow and intelligent drum reversal
Air is guided through the drum to support consistent results, while drum reversal helps reduce tangling and improve drying uniformity.
Controls
M Touch Pro programmable controls
The touchscreen control system helps staff select the right programme and allows the machine to be adapted to the site’s routine.
Staff confidence
Selectable languages and colour programme frames
Clear user guidance helps reduce operating errors, especially in shared laundries or sites with multiple users and shift patterns.
Filter care
Practical large-surface fluff filter
Accessible filter care supports drying performance and helps reduce avoidable issues caused by fluff build-up in high-use environments.
Payment ready
Optional payment system connection
Useful for launderettes, accommodation blocks, residential homes, holiday sites and other shared laundry environments where paid use may be required.
Connectivity
WiFi with optional LAN module
Supports connected laundry management for compatible Miele Professional machines, including status visibility and operating data where configured.
Commercial suitability
Designed for intensive professional use
A Performance Plus dryer suitable for a wide range of commercial sectors, with site suitability dependent on gas supply, ventilation and laundry volume.
Technical specifications
Key technical details for the Miele PDR 910 [G], including capacity, dimensions, gas and electrical requirements, drying performance, controls, connectivity and ventilation requirements.
Choosing the right machine
Is the Miele PDR 910 [G] the right model for your site?
The Miele PDR 910 [G] is a strong option where a site needs a fast, professional vented dryer and has the right gas supply, electrical supply, ventilation route and room conditions.
Because this is a gas-heated vented dryer, suitability is not only about capacity. The installation must be checked around gas connection, exhaust ducting, make-up air, access, safety and the laundry workload.
When is this dryer a good fit?
This dryer is a good fit where the site needs professional drying capacity, fast cycle performance and a machine that can be matched to an existing or planned gas-heated laundry room.
It is especially worth considering where:
- You need an 8-10kg dryer to pair with a similar-capacity commercial washer.
- Your site has, or can provide, a suitable gas supply and 230v electrical supply.
- A correctly designed exhaust duct route to atmosphere is available.
- Fast drying turnaround matters more than avoiding vent ducting.
- The laundry handles towels, bedding, workwear, uniforms, sports kit or general commercial loads.
It is also relevant for shared laundry environments where optional payment connection may be useful, subject to the wider laundry setup and user requirements.
Contact us for a specification check or site visit before ordering.
Contact us
What should I check before choosing this model?
The main checks are gas, ventilation, airflow, electrical supply, room access and workload. These should be confirmed before ordering, because the wrong dryer type can be expensive to adapt later.
- Gas services: confirm the gas supply, connection pressure, shut-off arrangements and whether any conversion is required.
- Electrical supply: confirm a suitable 230v, 10A supply for the machine controls and operation.
- Exhaust ducting: confirm the duct diameter, route, resistance, termination and whether a non-return flap is needed.
- Make-up air: ensure the room can supply enough air for safe and effective drying.
- Routine cleaning: make sure staff will clean fluff filters and check air paths as part of the laundry routine.
a&f can assess the room, services and duct route before confirming whether this gas model is the best version for the site.
When might another model be better?
Another dryer may be a better choice if the site cannot support gas heating, cannot provide a suitable exhaust route, or needs a different balance of capacity, energy use and installation flexibility.
- Choose an electric PDR 910 version where gas is not available but a suitable 230v or 400v electrical supply can be provided.
- Consider a heat pump dryer where external venting is not possible and lower electrical running cost is a priority.
- Consider a larger dryer if regular loads are above 10kg or if the washer capacity is significantly larger.
- Consider a smaller dryer if the workload is light and the room does not need this level of capacity.
- Review the full laundry flow if multiple washers are feeding one dryer and creating a bottleneck.
The gas PDR 910 [G] should not be selected just because it has a fast reference programme. It needs to fit the site’s services, ducting, room and daily laundry process.
Services, utilities and installation checks
This model uses gas heating, a 230v electrical connection and exhaust air ducting. Installation should be planned by competent professionals, with gas work carried out by an appropriately qualified Gas Safe registered engineer.
- Power Required: 230v, 10A.
- Gas heater rating: 8.00 kW.
- Total connected electrical load: 0.32 kW.
- Gas connection: 1/2" according to ISO 7-1.
- Exhaust duct: Ø 100 mm machine connection, with duct size confirmed against equivalent duct length.
Programme times depend on load weight, residual moisture from the washer, textile type, selected programme, gas setup, airflow and duct condition. a&f can help check these details before quote or installation.
Replacing an older model?
If you are replacing an older Miele gas or vented commercial dryer, the PDR 910 [G] may be a relevant current equivalent, but the services and ducting still need checking rather than assuming a direct swap.
Older and related search terms listed in the a&f historic source files for PDR910 include:
PT7186, PT8253, PT8257, PT7251, T6185, T6200, T5218, T125, T6251, T6250, T5225G and T5226EL.
Before replacing an older dryer, check the footprint, door swing, electrical supply, gas connection, duct diameter, duct route, airflow, exhaust termination and whether the old machine used any payment or external control system.
Compliance, hygiene and environment
This is a commercial tumble dryer, not a washing or thermal disinfection machine. It can support a professional laundry process, but hygiene outcomes depend on the full process, including washer selection, programme setup, segregation, handling, detergent choice, validation and staff procedure.
- Gas safety: installation, commissioning, maintenance and any conversion work must be handled by suitably qualified specialists.
- Ventilation: the exhaust route and make-up air must be suitable for safe, efficient operation.
- Routine filter care: blocked filters, air paths or ducts can extend drying times and cause faults.
- Standards and markings: the product sheet lists VDE, VDE-EMC, IPX4, WEEE, UKCA and Machinery Directive compliance.
- Environmental fit: gas can be a sensible option where the building services and operating cost profile support it, but this should be compared against electric or heat pump options for the site.
a&f can help assess whether gas, electric vented or heat pump drying gives the best balance of throughput, running cost, installation practicality and long-term support.
Product downloads
Helpful documents for this machine
Download the main documents for the Miele PDR 910 [G] below. These include the Miele product sheet and operating instructions. If you need installation guidance, gas connection advice, ventilation checks or help confirming whether this is the right dryer, contact a&f and we will be happy to help.
Miele PDR 910 [G] product sheet
Key product information including capacity, dimensions, gas and electrical requirements, drying performance, controls, connection options and core features.
Miele PDR 910 gas dryer operating instructions
Manufacturer guidance covering operation, programme use, routine care, cleaning, installation notes, exhaust air management and gas-related instructions.
Need another document or more product information?
If you need installation instructions, ventilation guidance, gas connection information, user training guidance or support choosing the right version of this machine, we will be happy to help. Call us on 01243 55 55 25, option 1 for sales support, or email sales@a-f.co.uk.
Our Products
Commercial laundry and dishwashing equipment
Products selected for the way you need them to work
a&f supplies commercial washing machines, tumble dryers, dishwashers, ironers, finishing equipment and payment systems from carefully selected commercial brands. Every recommendation is made in context, so the equipment suits your workload, staff, space, services and long-term objectives.
Discover. Define. Deliver.
Every operation is different. We take time to understand your operation, design the right solution, and support it for the long term so your laundry and dishwashing operation works in practice.
DISCOVER
We come to you and learn how your operation really works.
- We assess space, access, utilities and real-world constraints.
- We explore your current challenges, pressures and priorities.
- We quantify demand, workflow and performance expectations.
- We agree what success looks like for you in practice.
DEFINE
We design the right solution around your operation.
- We shape layout, infrastructure and workflow before anything is fixed.
- We specify the right equipment and the right way to fund it, whether purchase, rental or contract hire.
- We produce a clear, fully costed and compliant proposal.
- We refine the plan with you until it is operationally sound.
DELIVER
We get you running, then keep you running for years to come.
- We install professionally, safely and with minimal disruption.
- We train you and your team for confident, correct daily operation.
- You gain a dedicated support team who know your operation.
- We protect performance through servicing and rapid response.
- We review, optimise and evolve your operation over time.
The a&f difference: we don't just supply equipment, we partner with you for the long term to keep your laundry operation running at its best.
Contact us on 01243 55 55 25 to learn more, or arrange your free site visit to get started.
Services & Support
Product advice, installation and support
From product selection through to installation, servicing and long-term support, a&f helps organisations choose equipment that fits their site, workload, users and operating requirements.
Support beyond the product
We supply, install and support professional laundry and dishwashing equipment, with guidance focused on performance, reliability, efficiency and long-term value.
Machine Repairs
Repair support for professional washers, dryers, dishwashers and associated equipment used across commercial and specialist environments.
Sales & Installation
Supply, installation and commissioning of equipment selected around the site, workload, users, infrastructure and long-term operating costs.
Annual Servicing & Inspections
Planned servicing and inspections to help keep equipment running reliably, reduce avoidable downtime and support long-term performance.
Service Contracts
Ongoing service support for organisations that rely on professional equipment as part of their everyday operation.
Machine Rentals
Rental options for sites that need a supported equipment solution without purchasing outright.
Laundry Analysis & Design
Practical advice for laundry rooms, dishwashing areas, plant spaces, service areas, refurbishments and new projects.
Not sure where to start?
A free site survey is usually the best first step when choosing professional laundry or dishwashing equipment for your site.
- Check the room, services, access, workflow and usage
- Compare suitable washing, drying, dishwashing and finishing options
- Avoid over-specifying or choosing equipment that does not fit the operation