PDW 909 [EL DP DD] Iron Grey 400V 16A
(Washer 9kg / Dryer 9kg) Stacked washer 9kg / dryer 9kg, drain pump, iron grey
A space-saving Miele stacked washer-dryer with a professional washer, vented dryer and drain pump washer configuration.
- ✓Washer and dryer in one vertical footprint
- ✓9kg washer with 80 litre drum
- ✓9kg vented dryer with 180 litre drum
- ✓Drain pump washer configuration
- ✓M Touch Pro Plus washer controls
Fri 8.30am–5pm
Use the button below and we’ll call you back.
Product Overview
The Miele PDR 307 HP P [EL] is a 7kg professional heat-pump tumble dryer from the Miele Little Giants range, built for sites that need dependable commercial drying without external vent ducting.
It has a 130-litre honeycomb drum, a 67-minute Cottons/Normal programme, low energy consumption compared with vented dryers, and a propane-based heat pump system for more sustainable drying.
It is a strong choice for private residences, housing associations, schools, sports clubs, holiday sites, small businesses and shared laundry environments where reliable drying is needed but vent ducting is difficult or unavailable.
At a glance
850(h) x 596(w) x 777(d)
230v, 13A
Heat Pump, no vent ducting required
How a&f can support you
Buying commercial laundry equipment is about more than choosing the machine. We help you get the right Miele solution for your site from day one, and support you long after it is installed.
We can help with site survey, correct variant selection, supply, installation, commissioning, user training and long-term service support.
- ✓ Manufacturer-trained engineers
- ✓ Around £12,000 of Miele spare parts carried on each service van
- ✓ Warranty handling, annual servicing and service contracts
- ✓ Rental and finance options available alongside outright purchase
Need this machine supplied, installed and supported?
Speak to a&f about purchase, rental, installation and service contract options for this product.
Call us on 01243 55 55 25, option 1 for sales support, email sales@a-f.co.uk, or click the green button.
Features and buyer benefits
A tighter overview of the features that matter most in daily use, helping buyers quickly understand capacity, drying performance, energy efficiency, ease of use and installation flexibility.
Capacity
7kg load with a 130L honeycomb drum
A practical size for smaller commercial laundry rooms, shared laundries and high-use domestic settings, with Miele’s honeycomb drum supporting gentle fabric care.
Heat pump drying
No external vent ducting required
A flexible option where external ducting is difficult, restricted or not available, while still providing professional drying performance.
Energy efficiency
Up to 50% less energy use than vented dryers
Heat pump drying helps reduce running costs and energy use compared with electrically heated vented dryers.
Drying performance
67-minute Cottons/Normal programme
Designed to deliver dependable daily drying for sites that need a compact commercial dryer with consistent results.
Fabric care
PerfectDry and residual moisture control
Helps achieve accurate drying results by monitoring the load, reducing the risk of under-drying or unnecessary over-drying.
Gentle handling
SoftLift drum ribs and gentle tumble function
Supports careful movement of fabrics inside the drum, helping protect laundry during repeated commercial use.
Controls
M Select control system
A clear and familiar control layout that helps users select the right programme quickly and confidently.
Multi-language
Language selectable during operation
Useful for shared laundries, hospitality sites, education environments and teams where more than one language may be used.
Condensate drainage
Condensed water drainage included
Allows the dryer to discharge condensed water without needing a manual water container to be emptied after each use.
Maintenance access
Door fluff filter and heat exchanger filter system
Designed to support routine care and help maintain drying performance when the machine is used regularly.
Payment ready
Optional payment system connection
Can be configured for suitable paid laundry environments, including shared and communal laundry settings.
Connectivity
WiFi and WiFiConn@ct ready
Supports future-proof connectivity and integration with Miele’s professional digital management tools.
Technical specifications
Key technical details for the Miele PDR 307 HP P [EL], including capacity, installation requirements, power supply, drying performance and practical product features.
| Model | Miele PDR 307 HP P [EL] |
|---|---|
| Material number | 12752650 |
| Range | Miele Little Giants, Evolution |
| Product type | Professional heat-pump tumble dryer |
| EAN | 4002516870906 |
| Load capacity | 7 kg |
|---|---|
| Drum volume | 130 litres |
| External dimensions | H 850 mm W 596 mm D 777 mm |
| Net weight | 65.5 kg |
| Installation type | Front-loader, stackable |
| Power Required | 230v, 13A |
|---|---|
| Total connected load | 1.44 kW |
| Heating type | Heat pump |
| Drying system | Heat pump, no external vent ducting required |
| Heat dissipation | 3.60 MJ/h |
| Cottons/Normal programme | 67 min at 48% residual moisture |
|---|---|
| Mixed fibre programme | 60 min at 40% residual moisture |
| Maximum evaporation capacity | 3 l/hour |
| Specific energy use | 0.20 kWh/kg |
| Sound pressure level | <70 dB(A) re 20 µPa |
| Control system | M Select |
|---|---|
| User interface | Residual moisture controlled |
| Languages | Selectable during operation |
| Connectivity | WiFi and WiFiConn@ct |
| Delay start | Up to 24 hours |
| Finish | Lotus white front with stainless steel fascia |
|---|---|
| Door opening | 370 mm diameter, 167° opening angle |
| Door hinge | Left-hand |
| Condensate handling | Condensed water drainage |
| Refrigerant | R290, 0.14 kg |
| Payment systems | Optional payment system connection |
Choosing the right machine
Is the Miele PDR 307 HP P [EL] the right model for me?
The Miele PDR 307 HP P [EL] is a strong choice where reliable commercial drying is needed, but external vent ducting is not practical or available. Its heat pump system makes installation simpler than a vented dryer and helps reduce energy use in daily operation.
It is best suited to smaller commercial laundry rooms, shared laundries, private residences, schools, sports clubs, holiday accommodation, beauty and fitness environments, and other sites where a compact 7kg dryer is the right match for the workload.
When is this dryer a good fit?
This model is a good fit where the site needs a compact commercial dryer with professional build quality, simple controls and flexible installation.
- Suitable for sites needing a 7kg professional dryer.
- Useful where external vent ducting is difficult, restricted or unavailable.
- Suitable for smaller laundry rooms where space is limited.
- Can be stacked with a suitable matching washer to create a compact laundry setup.
- Useful for shared laundry settings where optional payment connection may be required.
What should I check before choosing a heat pump dryer?
A heat pump dryer avoids the need for external exhaust ducting, but it still needs the right installation environment, drainage arrangement and user routine.
- Check that the laundry room has enough space around the machine for access and servicing.
- Confirm that condensed water drainage can be connected correctly.
- Make sure staff or users understand routine fluff filter care.
- Check whether the slightly longer drying profile of a heat pump dryer is suitable for the site’s laundry flow.
- Confirm that a 230v, 13A electrical supply is available.
When might a vented dryer be the better option?
In some high-use commercial environments, a vented dryer may still be the better choice because productivity and cycle speed can be more important than the installation flexibility and energy savings of heat pump drying.
- Choose a vented dryer where the site has suitable exhaust ducting to atmosphere.
- Consider vented drying where laundry throughput is the main operational priority.
- Consider a larger dryer if the site regularly processes loads above 7kg.
- Review the full laundry flow if washers are producing more work than this dryer can comfortably keep up with.
Services, drainage and cycle times
This model uses heat pump drying with condensed water drainage, so it does not need an external vent duct. The Miele product sheet gives a 67-minute Cottons/Normal programme at 48% residual moisture and a 60-minute mixed fibre programme at 40% residual moisture.
- Electrical connection: 230v, 13A.
- Total connected load: 1.44 kW.
- Drying system: heat pump.
- Condensed water drainage should be planned during installation.
- Routine filter care is important for drying performance.
Replacing an older dryer?
If this dryer is replacing an older vented, condenser or domestic machine, the installation and daily user experience may be different. The most important checks are the electrical supply, available space, condensate drainage and whether the site’s drying workload matches a 7kg heat pump dryer.
Where a site has existing exhaust ducting and needs faster daily throughput, a vented commercial dryer may be worth comparing before making a final decision.
This model may be relevant when replacing or searching for older Miele heat pump or condenser dryer models including the PT5135 WP, PT7135 WP, PT7135C, T5205C and T5212.
Compliance, hygiene and environment
This model is a commercial tumble dryer, not a thermal disinfection machine. It can form part of a professional laundry setup, but hygiene outcomes depend on the full laundry process, including the washer, wash programme, segregation, handling and staff procedure.
- The heat pump system uses R290 refrigerant.
- The datasheet lists UKCA, CE, VDE, VDE-EMC and IPX4 splash-proof safety rating.
- For care, healthcare or veterinary sites, the full laundry process should be reviewed before choosing equipment.
- a&f can help confirm whether this dryer is suitable alongside the washer and site process.
Need help checking suitability?
Contact us for a free specification check or site visit before ordering. Call us on 01243 55 55 25, option 1 for sales support, or email sales@a-f.co.uk.
Product downloads
Helpful documents for this dryer
Download the main documents for this product below. These include the Miele product sheet and operating instructions. If you need installation guidance, compliance information or help confirming whether this is the right dryer, contact a&f and we will be happy to help.
Miele PDR 307 HP P [EL] product sheet
Key product information including capacity, dimensions, power requirements, heat pump drying details, condensate drainage, connectivity and core features.
Miele PDR 307 HP P [EL] operating instructions
Manufacturer guidance covering operation, programme use, routine care, filter cleaning, safe use and user instructions for this dryer.
Need another document or more product information?
If you need installation instructions, compliance documents, user training guidance or support choosing the right version of this dryer, we will be happy to help. Call us on 01243 55 55 25, option 1 for sales support, or email sales@a-f.co.uk.
Our Products
Commercial laundry and dishwashing equipment
Products selected for the way you need them to work
a&f supplies commercial washing machines, tumble dryers, dishwashers, ironers, finishing equipment and payment systems from carefully selected commercial brands. Every recommendation is made in context, so the equipment suits your workload, staff, space, services and long-term objectives.
Discover. Define. Deliver.
Every operation is different. We take time to understand your operation, design the right solution, and support it for the long term so your laundry and dishwashing operation works in practice.
DISCOVER
We come to you and learn how your operation really works.
- We assess space, access, utilities and real-world constraints.
- We explore your current challenges, pressures and priorities.
- We quantify demand, workflow and performance expectations.
- We agree what success looks like for you in practice.
DEFINE
We design the right solution around your operation.
- We shape layout, infrastructure and workflow before anything is fixed.
- We specify the right equipment and the right way to fund it, whether purchase, rental or contract hire.
- We produce a clear, fully costed and compliant proposal.
- We refine the plan with you until it is operationally sound.
DELIVER
We get you running, then keep you running for years to come.
- We install professionally, safely and with minimal disruption.
- We train you and your team for confident, correct daily operation.
- You gain a dedicated support team who know your operation.
- We protect performance through servicing and rapid response.
- We review, optimise and evolve your operation over time.
The a&f difference: we don't just supply equipment, we partner with you for the long term to keep your laundry operation running at its best.
Contact us on 01243 55 55 25 to learn more, or arrange your free site visit to get started.
Services & Support
Product advice, installation and support
From product selection through to installation, servicing and long-term support, a&f helps organisations choose equipment that fits their site, workload, users and operating requirements.
Support beyond the product
We supply, install and support professional laundry and dishwashing equipment, with guidance focused on performance, reliability, efficiency and long-term value.
Machine Repairs
Repair support for professional washers, dryers, dishwashers and associated equipment used across commercial and specialist environments.
Sales & Installation
Supply, installation and commissioning of equipment selected around the site, workload, users, infrastructure and long-term operating costs.
Annual Servicing & Inspections
Planned servicing and inspections to help keep equipment running reliably, reduce avoidable downtime and support long-term performance.
Service Contracts
Ongoing service support for organisations that rely on professional equipment as part of their everyday operation.
Machine Rentals
Rental options for sites that need a supported equipment solution without purchasing outright.
Laundry Analysis & Design
Practical advice for laundry rooms, dishwashing areas, plant spaces, service areas, refurbishments and new projects.
Not sure where to start?
A free site survey is usually the best first step when choosing professional laundry or dishwashing equipment for your site.
- Check the room, services, access, workflow and usage
- Compare suitable washing, drying, dishwashing and finishing options
- Avoid over-specifying or choosing equipment that does not fit the operation