This model is a good fit where staff need a professional dishwasher that is straightforward to use and capable of processing mixed items in baskets.

• Suitable for smaller restaurants, bars, guesthouses, canteens, offices and sports clubs.
• Useful where a fresh-water wash system is preferred for consistent wash results.
• Suitable for sites washing plates, glasses, cutlery, beer glasses and plastic items.
• Helpful where staff benefit from M Touch Basic touchscreen controls and clear programme selection.
• Appropriate where a compact freestanding front-loader is a better fit than a larger pass-through dishwasher.

Before choosing the PFD 400 WB Speed, the main checks are power, water, drainage, available space and whether the throughput is suitable for the site’s dishwashing routine.

• Confirm the correct electrical supply for the version being ordered. The standard linked model is listed as 230v, 30-32A.
• Check whether the site will connect to cold or hot water, and whether the incoming water temperature is suitable.
• Confirm whether the water flow pressure is within Miele’s stated range.
• Confirm that the drain pump connection and maximum pump head height are suitable for the site.
• Check that the machine footprint, height adjustment and niche width work with the available space.
• Review basket loading requirements, especially if the site has larger trays, pans or unusual catering items.

Another dishwasher may be more appropriate if the site needs higher throughput, a different hygiene capability, or a simpler tank-machine workflow.

• Choose a pass-through or larger tank dishwasher where peak-service throughput is the main pressure point.
• Consider the Miele PFD 401 WB Speed Plus if a faster or higher-performing version is required.
• Consider a Miele PFD 404 Hygiene where the site specifically needs a machine designed around enhanced hygiene capability.
• Consider a Classeq dishwasher where simplicity, tank throughput and familiar catering-dishwasher operation are the priority.
• Consider a larger or more specialist solution if the site regularly processes large trays, pots or production-kitchen items.

The PFD 400 WB Speed is a freestanding fresh-water front-loader with drain pump, integrated water softener and WiFi connectivity. Installation should be checked carefully before ordering, especially the electrical supply, incoming water temperature, water pressure and drainage route. Although Miele lists a shortest programme duration of 9 minutes, this is based on optimal site conditions. In many real-world environments, a standard wash time of around 15 to 30 minutes may be more realistic.

• Power Required: 230v, 30-32A for the standard linked model.
• Total connected load: 5.90 kW.
• Cycle times: Miele-listed shortest programme from 9 minutes under optimal conditions; realistic wash times depend on site services.
• Water connection: cold or hot water.
• Required flow pressure: 0.40-10.00 bar.
• Drainage: drain pump DN22, with maximum pump head height of 100 cm from floor level.
• Water consumption: 17.50 litres per wash cycle.
• Connectivity: WiFi and Miele MOVE network capability.

Miele also lists 230v, 13A and 230v, 16A possible voltage variants. These should be checked against the exact material number and site requirement before ordering. As part of a site assessment, a&f can review your services and advise on realistic cycle times for your environment.

If the PFD 400 WB Speed is replacing an older Miele fresh-water dishwasher, the key checks are dimensions, power supply, basket arrangement, water treatment, drainage and the daily wash pattern.

Older machines may have different electrical requirements, controls, basket arrangements or installation clearances, so a like-for-like replacement should still be checked before ordering.

This model may be relevant when replacing or searching for older Miele dishwasher models including PG8055, G7855Freshwater, G7761, G7700, G700/701 and G70.

The PFD 400 WB Speed supports professional dishwashing where hygiene, process control and consistent operation matter. The product sheet lists proven hygiene, tested virucidal efficacy, DIN 10512, DIN EN 17735 and Regulation 4 compliance.

• The machine has a maximum final rinse temperature of 70°C.
• The integrated water softener helps manage water hardness and protect wash quality.
• The datasheet lists CE, UKCA, Regulation 4 compliance and IPX1 splash protection.
• For care, healthcare or specialist hygiene environments, the full dishwashing process should be reviewed before choosing equipment.
• a&f can help confirm whether this model, a PFD 401 Speed Plus, a PFD 404 Hygiene or another dishwasher is the better fit.