This model is a good fit where the site needs a large-capacity washer with professional extraction, programmable controls and the ability to process varied commercial laundry loads.

• Suitable for sites needing a 35kg professional washer with a 320 litre drum.
• Useful for larger batches of linen, towels, workwear, mops, cloths and bulky items.
• Appropriate where hot and cold fill can be used to reduce cycle time and energy use.
• Suitable where programmable controls and external dosing are needed for repeatable laundry processes.
• Useful for sites that need a drain valve machine for heavy commercial use.

The PWM 935 is a large industrial-style washer, so the main checks are space, access, electrical supply, water services, drainage, floor load and whether the laundry flow can make proper use of a 35kg load size.

• Confirm that a 400v, 63A electrical supply is available or can be provided.
• Check that the site has suitable cold and hot water supplies for this machine.
• Confirm that a suitable DN70 drain route is available for the dump valve discharge.
• Check access route, doorways, floor strength and final room position before ordering.
• Make sure the matching dryer capacity and laundry workflow can keep pace with the washer.

Another model may be a better choice if the site does not regularly build up loads close to 35kg, if the available services are limited, or if the laundry room cannot practically accommodate a machine of this size.

• Choose a smaller model if typical loads are closer to 20kg or 27kg.
• Consider a smaller Miele Performance Plus washer if space, access or floor loading is restricted.
• This is a drain valve machine, not a drain pump model, so drainage must be planned accordingly.
• A barrier washer should only be considered for rare, specialist, very high-risk contamination-control environments where physical separation is essential.
• For very specialist infection-control processes, the full laundry procedure, segregation and programme configuration should be reviewed before selection.

The product sheet lists external dimensions of 1646 mm high, 1090 mm wide and 1275 mm deep, with a net weight of 658 kg and a maximum floor load of 9458 N. These figures should be checked against the planned installation area before ordering.

• Power Required: 400v, 63A.
• Total connected load: 31.6 kW.
• Drainage: DN70 dump valve.
• Water connections: 4 x cold water, 2 x hot water, with optional hard water connection.
• 60°C cottons cycle: 61 minutes on cold fill, 49 minutes with hot and cold fill.

Actual cycle times and running performance depend on site services, incoming water temperature, water pressure, load type, selected programme and installation conditions.

If the PWM 935 is replacing an older large Miele washer, the most important checks are the electrical supply, machine footprint, drain position, water services, plinth arrangements, dosing connection and access route.

Compared with older machines, the PWM 935 adds modern M Touch Pro Plus controls, LAN and WiFi connectivity, improved efficiency and a current Miele Professional platform.

Relevant older Miele search terms for this model include PW6327, PW6321, WS5323 and WS5533.

The PWM 935 includes disinfection rinse, temperature monitoring, proven hygiene and tested hygiene performance, but hygiene outcomes depend on the full laundry process as well as the machine itself.

• Suitable programmes, chemicals, load handling and segregation should be agreed for care, healthcare or specialist environments.
• The product sheet lists Regulation 4 compliance, UKCA, CE, VDE, VDE-EMC, WEEE and IPX4 splash-proof safety rating.
• Automatic load control Plus helps adjust resources to the load.
• LAN and WiFi connectivity can support digital management through Miele MOVE where configured and available.
• a&f can help review the whole process, including washer selection, dryer pairing, utilities, drainage and operating routines.